Setting up a VPN client on Windows 11 involves more than installing an app. You also need to import a subscription, load its configuration, choose a route, and make sure Windows is sending traffic through the client. This guide walks through those steps using Clash Verge, a third-party client that can work with compatible subscription formats. Button names and screen layouts may differ slightly between releases, so use the descriptions here to identify the relevant function rather than relying on an exact position in the window.

Before you install Clash Verge

First, confirm that your Windows account can install desktop applications and that you can access the service account or panel where your subscription information is available. You will need the subscription URL or another import method supported by your account. A subscription URL is sensitive: it can allow a client to retrieve configuration information, so treat it like a credential rather than an ordinary web address.

Get Clash Verge from a distribution channel you trust, such as the project’s official release source or a link provided by your service. Avoid repackaged installers from download aggregators, unfamiliar file-sharing pages, or search results that merely resemble the project. Before running an installer, check that its name and version match the source you intended to use. If Windows displays a security prompt, pause and confirm that you deliberately launched the installer you obtained; do not dismiss warnings for an unexpected file.

Close other proxy or VPN clients before the first setup. Multiple applications can compete to manage the Windows system proxy, routing rules, or DNS settings. If another client must remain installed, make sure it is disconnected and that its system-proxy or tunnel mode is not still active. You can reopen it later, but testing one network client at a time makes faults much easier to identify.

  • ✅ Keep the subscription URL private and copy it only from a trusted account page.
  • ✅ Install Clash Verge from a source you can identify and verify.
  • ✅ Disconnect other proxy clients before configuring the first connection.
  • ❌ Don’t paste your account password into a field intended for a subscription URL.

Clash Verge is a compatible client, not the subscription service itself. It manages profiles and routes locally; your service account supplies the subscription information. If you are comparing options for a particular destination or app, you can also review the available VPN for China service information before choosing a compatible setup.

Install the app and understand its main areas

Run the installer you obtained and follow its prompts. If Windows asks for permission to make changes, verify that the prompt relates to the installer you just opened. After installation, launch Clash Verge from the Start menu. On its first launch, Windows may also ask whether to allow network access. Allowing an app through the firewall is different from granting it administrator privileges: approve only the permissions needed for the feature you intend to use.

Take a moment to identify the areas you will use. A profile or subscription view contains imported configurations. A proxy or route view presents the available policies and nodes. The dashboard or connection controls show whether the client is running, while settings contain options such as the system proxy and TUN mode. Depending on the release, labels and navigation may be arranged differently. If a control is not visible, check the app’s settings or built-in help rather than changing unrelated Windows network settings.

Clash Verge commonly uses the Mihomo core to process supported configurations. A subscription designed for a different client may not import correctly, even if it is also described as a VPN subscription. The expected format, supported core, and import method matter. If a provider offers several client-specific links, choose the one intended for Clash or a compatible Clash-based client. Do not try to solve an unsupported format by uploading the subscription to an unknown online converter.

Before importing anything, note the current state of Windows’ proxy settings. In Windows 11, the manual proxy controls are available under Settings and Network & internet, although the exact screen organization may change between Windows updates. You usually do not need to enter an additional proxy address there when Clash Verge is configured to manage the system proxy itself. Setting both independently can leave Windows pointing at a local proxy even after the client is stopped.

Import and refresh your subscription

Sign in to the account area that provides your subscription, then locate the subscription or client-configuration section. Copy the link using the account page’s copy control if one is available. Do not copy a browser address bar URL unless the service specifically identifies it as the subscription link: the account page URL and the client import URL serve different purposes.

In Clash Verge, open the profile or subscription section and choose the option to add a profile from a URL. Paste the copied link into the URL field, provide a recognizable profile name if the app requests one, and confirm the import. If the client offers a separate option for a local file, select the URL-based option for a subscription link. A URL that points to a single configuration file is not necessarily interchangeable with a subscription endpoint that can provide updated profiles.

Wait for the client to fetch and process the profile. A successful import usually adds a profile entry and makes its configuration available for selection. It does not necessarily mean that a route is already connected. If the import reports an error, check that the copied link is complete, that there are no leading or trailing spaces, and that your device can reach the service. If the link has expired or was copied from the wrong account area, retrieve a fresh one rather than repeatedly retrying an incorrect address.

After adding a profile, select it as the active configuration if the client does not do so automatically. Use the profile’s update or refresh control when you need to retrieve the latest configuration. A refresh updates the profile data; it is not the same as restarting the network connection or changing the selected route. If your provider changes a configuration or makes a new route available, refresh first, then check whether the relevant entry appears in the route list.

Keep the subscription URL out of screenshots, public chat, shared documents, and support messages unless a trusted support channel specifically needs it. If you need help with an import failure, describe the error and client version, and redact the URL and any account identifiers. A screenshot showing a full URL or configuration details can expose access information even if your password is not visible.

Choose a route and start the connection

Once the profile is active, open the proxy or route view. You may see groups that select routes automatically as well as individual route entries. An automatic group is convenient for routine use, while manual selection is useful when you want to keep the route fixed during troubleshooting. Names can indicate a country, region, purpose, or route type, but a name alone does not guarantee that a particular website or app will work through it.

Select one route or policy in the group you intend to use. If the group has a test or delay-check control, treat its result as a screening aid, not a guarantee of application performance. A route can respond to a probe while a target service still rejects access, and test results can change with network conditions. For an initial check, choose a single route and keep it selected while you verify the connection. Switching several settings at once makes it difficult to tell which change mattered.

Next, decide how Windows traffic should be handled. The system-proxy option is generally suitable when applications respect the Windows proxy settings. With this mode, the client configures a local proxy and directs supported app traffic through it. Some applications may use their own network stack or ignore system proxy settings, so a working browser test does not prove that every desktop app uses the same route.

TUN mode creates a virtual network interface and can route a wider range of device traffic. It may require administrator permission, and Windows security software or another virtual-network application can affect its operation. Use it only if you understand why system-proxy mode is insufficient for your application. Do not enable both modes or change Windows proxy fields at random to compensate for a route that has not been tested.

After choosing the mode, start the client or enable the connection control. If Windows asks for permission needed by a TUN interface, confirm that Clash Verge is the application requesting it. Look for an active or running state in the client, then check that the selected route is still the one you chose. A profile being loaded, a proxy being enabled, and a successful visit to a destination are separate checks; complete all of them before concluding that setup is finished.

Key point:Importing a profile makes routes available; selecting a route and enabling the appropriate traffic mode are separate steps required to use one.

Verify that Windows is using the connection

Begin with a simple check in a browser. Open a page that shows the public IP address or approximate network region, and compare the result with what you see when the client is disconnected. A changed result suggests that the browser’s request is leaving through a different exit, but it does not establish that all Windows traffic follows the same path. Use a trusted checking page and avoid entering account credentials on unfamiliar test sites.

Then test the app or service you actually intend to use. Load a page, sign in only if you are confident that it is the genuine service, or try a non-sensitive action that confirms basic access. Some platforms make decisions based on account region, payment details, device location, or other signals, so changing the network route alone may not change the result. Do not treat a single successful browser check as proof that a streaming app, game, or background process is using the same proxy.

If an app still appears to use your regular connection, check whether it honors the Windows system proxy. A browser configured with its own proxy may behave differently from a desktop app. If that app requires traffic that does not follow the system proxy, consider whether TUN mode is appropriate and whether its permission prompt completed. Change one mode at a time, restart the affected app after changing the routing setup, and repeat the same test.

You can also inspect Windows’ proxy settings while the client is running. If Clash Verge manages the system proxy, the relevant Windows setting may show a local proxy address. That local address is part of the client’s connection between Windows applications and the local proxy service; it is not the remote route address you should share publicly. When the client stops, its managed system-proxy setting should normally be restored or disabled according to the client’s configuration. If Windows remains pointed at a local proxy after the client exits, reopen the client and turn off its system-proxy control cleanly before making manual changes.

Troubleshoot common connection problems

If the subscription will not import, separate an account or link problem from a client problem. Confirm that you copied the intended subscription URL, that the link is not truncated, and that Windows has a working internet connection before the proxy is enabled. Then try refreshing the profile once. If the client reports an authorization, format, or network error, record the exact message without including the private URL. Check the service’s client instructions for a Clash-compatible format, or ask support whether the subscription link remains valid.

If the profile imports but the client cannot connect, confirm that the profile is active, select an available route, and check that the client’s core is running. Temporarily disconnect other VPN or proxy tools, including applications that may have installed a virtual adapter. If you recently enabled TUN mode, verify that it has the required permission and that another network filter is not blocking it. Restarting the client can clear a stale state, but repeated restarts will not correct an expired link or incompatible configuration.

If Clash Verge reports that it is running but pages do not load, check the selected route and the traffic mode before editing Windows settings. Try a different available route, then test a simple destination again. If a route works in one browser but not another application, investigate whether that application uses the system proxy. If no application can reach a destination, disable the client’s system proxy or tunnel mode in the app before restoring normal browsing, and check that Windows has not retained a proxy setting after the client stopped.

If the route works but a specific website or service does not, distinguish a network failure from a service-side restriction. Test whether ordinary pages load, whether the affected service shows an explicit region or account message, and whether the same service works after disconnecting. Do not conclude that the subscription is broken from one application’s response. Some services can block particular exits, require a different route, or apply account-level rules independently of the network path.

For a useful support request, include your Windows version, Clash Verge version, whether the subscription imported, the selected route or route group, and the exact error text. State whether you used system-proxy mode or TUN mode and whether other proxy software was running. Redact subscription links, passwords, tokens, account identifiers, and any configuration fields that could grant access. With those details, support can distinguish a Windows permission issue, an import-format problem, and a route-specific failure without needing your credentials.

  • ✅ Refresh the profile when configuration data needs updating, then select an available route.
  • ✅ Test the browser and the target application separately because they may handle proxy settings differently.
  • ✅ Turn off the client’s proxy or tunnel mode cleanly before restoring normal Windows networking.
  • ❌ Don’t expose a subscription URL in screenshots or send it to an unknown conversion service.

Once a route passes the checks that matter for your use, keep the configuration simple: use one active client, one clearly selected profile, and the traffic mode your applications need. If the connection later changes, repeat the same checks in order—profile status, selected route, client mode, Windows proxy state, and the affected application. That sequence is more informative than changing several options at once.