If your VPN connection keeps dropping, start by identifying what is actually disconnecting. The app may lose its connection to a server, the operating system may revoke its permission to run in the background, or the Wi-Fi or mobile network may be changing underneath it. These problems can look alike, but they call for different fixes. Check for a recent network change and background-app restrictions first; then test another server or protocol, one change at a time.
Identify the Kind of Disconnection
Notice what happens when the drop occurs. Does the client show “disconnected,” does it remain connected while websites stop loading, or does only one app lose access? If the client reports that it has disconnected, focus on the device’s network, the client process, and its server connection. If it still says connected but pages fail, the tunnel may be active while DNS, routing, or the destination service has a problem. If only one app is affected, check that app’s proxy settings and network permissions before changing the VPN client.
Look for patterns rather than relying on a single failed connection. A drop every time the phone screen turns off points toward power management. Drops when leaving home Wi-Fi may follow a switch to mobile data. If a laptop disconnects when it wakes from sleep, its network adapter or the client may not be restoring the connection cleanly. A connection that fails only on one Wi-Fi network may be affected by that router or network’s policies.
Write down the approximate time, the network in use, the device’s power state, the selected server, and any message shown by the client. Also note whether reconnecting works immediately. These details make it easier to compare tests and give support something concrete to investigate. Avoid repeatedly changing server, protocol, DNS, and system settings at once: if the problem disappears, you will not know which change helped.
5
Supported platforms
100+
Countries covered
220+
Routes
Unlimited
Simultaneous devices
VPN40 supports Windows, macOS, iOS, Android, and Linux. The same subscription can be used across devices, but a symptom limited to one device usually deserves a local check before you assume the account or service is the cause.
Check Network Changes and Background Settings
A VPN connection depends on the underlying internet connection. If Wi-Fi briefly drops, a router changes channels, mobile reception weakens, or the device moves between access points, the tunnel may need to reconnect. First, test the same device on a different trusted network if one is available. If it stays connected there, the original network is a useful lead. Restarting a router can be a reasonable test when other devices on that network also lose internet, but it will not fix an app that the operating system is suspending.
On phones and tablets, check whether the client is allowed to use background data and run while the screen is off. Battery saver, data saver, and vendor-specific power management can pause apps or limit their network activity. Menu names differ across operating-system versions and manufacturers, so search Settings for the client’s battery, background activity, or unrestricted data options. Grant only the access needed for the client to maintain its connection, and keep the app updated through its normal trusted source.
On a computer, check whether sleep, hibernation, or a network adapter’s power-saving behavior coincides with the interruption. A VPN cannot keep a live connection while the computer is asleep. After waking, allow the network to reconnect, then use the client’s own reconnect control. If the problem repeats, restart the client and test whether the computer’s Wi-Fi or Ethernet connection is stable without the tunnel.
When a connection changes from Wi-Fi to mobile data, an existing tunnel may not transfer seamlessly. Some clients reconnect automatically; others need a moment or a manual reconnect. If drops happen at that exact transition, temporarily keep the device on one network while testing. This helps distinguish a handoff issue from a server or account issue.
Run a Controlled Reconnection Test
Once you have checked the underlying network and background permissions, test the client methodically. Before making changes, confirm that the subscription is current and that the configuration shown in the client has not expired or been removed. If you use an official app, check its connection status and update information. If you use a compatible third-party client, confirm that the subscription has refreshed successfully and that the selected profile is still present.
- Confirm ordinary internet access. Disconnect the VPN briefly and check whether a few unrelated websites load. Reconnect afterward. If the internet is already unstable without the VPN, address the Wi-Fi, mobile data, router, or local network first.
- Restart the client. Disconnect through the app, fully quit it if appropriate for your device, reopen it, and connect again. On mobile, do not force-stop system components or remove a VPN profile unless the client’s instructions call for it.
- Test a different server. Choose another available server in the client, reconnect, and observe whether the failure repeats under the same network and device conditions. A different result is useful evidence, not proof that one route is permanently better.
- Test a supported protocol or mode. If the client offers more than one configuration supplied by the service, change only that setting and repeat the test. Protocol names such as Shadowsocks, VMess, Trojan, Hysteria2, and WireGuard describe different technologies; availability and behavior depend on the service configuration and client. Do not assume a protocol can be swapped manually or that a particular one will solve every network issue.
- Restore a known-good setup. If the change makes matters worse, return to the previous server or profile. Avoid importing duplicate subscriptions or repeatedly refreshing without checking the client’s result.
For reliable comparisons, keep the device in the same place, use the same network, and avoid switching several settings between tests. Record whether the client disconnected, remained connected without traffic, or reconnected by itself. If you are comparing routes, remember that a server label alone does not establish the route’s quality at a particular moment. Connection behavior can vary with the device, local network, destination, and current conditions.
For a general overview of supported access and service information, see VPN40 VPN for China. For troubleshooting, however, keep the test focused on the affected device and network rather than changing unrelated account settings.
Platform-Specific Checks
Windows
On Windows, check whether the VPN client remains open and whether Windows has switched between Wi-Fi and Ethernet. A laptop that sleeps, closes its lid, or changes networks may need the client to reconnect after the network adapter is available again. Restart the client before changing system networking settings. If the app reports a permission or adapter error, follow its official troubleshooting instructions; avoid deleting virtual adapters or resetting the network stack unless you understand the consequences and have a recovery plan.
Also consider whether another VPN, proxy, firewall utility, or network filter is active. Two tools that both try to control system traffic can conflict. Close or disable only the other tool you recognize, then retest. On a managed computer, ask the administrator before changing security or network policies.
macOS
On a Mac, check the menu bar or client window to confirm whether the tunnel itself dropped. If the Mac has just woken from sleep or moved between networks, give Wi-Fi time to reconnect before starting a new session. Quit and reopen the VPN app if it appears stuck. macOS may ask for permission to add or manage a VPN configuration; approve only a request from the client you intended to install.
If you use a third-party client, confirm that its selected profile and system VPN permission are still available. Avoid installing multiple network extensions to solve the same problem. If the connection fails only on one Wi-Fi network, compare with another trusted connection and check whether the network requires a sign-in page or has restrictions that affect VPN traffic.
Android
On Android, inspect the client’s battery usage and background activity permissions. Battery optimization can vary by device manufacturer, so the relevant control may be under Battery, Apps, or a similarly named settings area. If the client is meant to remain connected, allow the necessary background operation. Also check whether Data Saver restricts background data for the app.
Android’s system VPN settings may include an always-on option or a setting that blocks connections without the VPN. These options change how traffic behaves if the tunnel drops; they do not repair the cause of a disconnection. Understand the effect before enabling or disabling them, especially if you rely on access to local network services. If Android repeatedly asks to approve the VPN connection, verify that you are opening the intended client and not a duplicate app.
iPhone
On iPhone, check whether the drop follows a change between Wi-Fi and cellular data, a weak signal, or the phone being locked for an extended period. Confirm that the VPN configuration is still listed under the system’s VPN settings and that the client is allowed to establish the connection. If you use a content filter or another network-security app, test for a conflict without removing profiles you do not recognize.
Restart the client and, if needed, restart the iPhone before attempting more invasive changes. Removing a VPN configuration can also remove settings needed by the client; do this only when its instructions recommend it and you know how to import or restore the configuration. If the issue is limited to one Wi-Fi network but cellular access works, investigate the router or network rather than repeatedly reinstalling the app.
- ✅ Check whether ordinary internet access works when the VPN is disconnected.
- ✅ Look for battery, background-data, sleep, or network-handoff restrictions.
- ✅ Test one alternate server or supported profile at a time.
- ❌ Do not run multiple VPN or proxy clients simultaneously while diagnosing a drop.
- ❌ Do not share subscription links, passwords, QR codes, or configuration files publicly.
When to Contact Support
Contact support if the connection still drops after you have confirmed that the underlying network works, restarted the client, and tested another available server or supported profile. Include your device platform and operating-system version, the client name and version, the approximate times of the failures, the network type, the selected server or profile, and the exact error text. Explain what you already tested and what changed between tests. This is more useful than saying only that the VPN is unstable.
Share only the minimum information needed to investigate. A diagnostic log may include device or connection details; review it before sending if the client allows you to do so. Never post a subscription URL, password, authentication details, or a full configuration file in a public forum. If support requests logs or screenshots, use the official support channel and redact account credentials and unrelated personal information.
Support may ask you to reproduce the problem with a different network, server, or client version. Follow the steps in order and report whether the client disconnects completely or remains connected without traffic. Do not make unsupported manual edits to a subscription configuration while a case is being investigated, because that can make the original cause harder to identify.
Frequently Asked Questions
Why does my VPN drop when my phone screen turns off?
The operating system or device manufacturer may restrict background activity to save power. Check battery optimization and background-data settings for the VPN client, then test with the screen locked. Menu labels differ by device. If the drop also occurs while the phone is actively in use, investigate network changes and the selected route as well.
Should I change the VPN protocol?
Only test a protocol or mode that the service and your client actually provide. A protocol change can help distinguish compatibility issues on a particular network, but it is not a universal speed or stability fix. Change one setting, reconnect, and compare under similar conditions. If the client uses imported subscription profiles, do not edit protocol fields unless the provider’s instructions explain how.
Why does the client say connected but sites will not load?
The tunnel may be active while DNS resolution, routing, or the destination site is failing. Check more than one unrelated site, confirm that the underlying network is working, and test whether the issue affects all apps or only one. If only a single site or app fails, its own service or configuration may be responsible rather than a full VPN disconnection.
What information should I send to support?
Provide the device and operating-system version, client version, network type, approximate failure times, selected server or profile, error message, and the steps you have already tried. Use an official support channel and do not send passwords or expose your subscription link. If diagnostic logs are requested, share them privately and remove sensitive details where possible.